Simple and easy way to clean the iron

Photo of author

By Admin Desk

Best Ways to Clean an Iron

Ironing is especially expensive in today’s era, but no need to panic because you can use these following tips to clean rusty iron easily.

Ironing is often used in most people’s homes, causing the bottom to become too black and then the clothes begin to deteriorate, which is why women use improper ways to clean it and make the bottom of the iron worse.

Let us give you an easy and inexpensive way to clean the black bottom of Iron, which is possible with panadol extra and Paracetamol tablets.

Follow These Steps to clean Iron
  1. Mix water and baking soda. Make a paste of 1 tablespoon water and 2 tablespoons baking soda.
  2. Apply the paste to the iron. …
  3. Wipe iron clean. …
  4. Clean steam holes. …
  5. Re-fill the reservoir. …
  6. Turn on the steam. …
  7. Pour out the liquid.

Use Panadol extra or Paracetamol to clean the bottom of an Iron

To clear the iron from the tablets, you need to turn the iron on and warm it up. After the ironing is done, open the entire sheet of panadol extra or paracetamol and place the tablets individually on the ironing area where there are black marks and tissue support. Rub it on the iron or leave it on the iron, and when the tablet starts to melt, clean it with a cloth.

Read Also: How to remove car scratches easily

Continue the same procedure until the iron is cleaned. After following this method you will see how the black marks will be cleaned from the bottom of the iron.

In the meantime, one thing to keep in mind is that the ironing is hot, reheat it when the iron is cool, and when using this method, be sure to hold the tissue paper properly as the hand may burn.