I have completed the Linksys extender setup process but nothing worked. Tried everything to cover my home with lag-free WiFi signals but Linksys extender is not satisfying my internet needs. What should I do? How can I make the most out of my Linksys extender? Are such concerns similar to yours? Need not to worry! The cause behind such issues is only one, i.e. red light on your Linksys WiFi range extender.
Though Linksys WiFi range extenders are one of the best options to cover all areas of your home with lag-free WiFi coverage, yet they are also prone to major technical issues and one of the most seen is the red light issue.
The Linksys extender red light issue can hamper your internet experience in a big way. So, to fix it, apply the troubleshooting tips highlighted below.
Fix: Linksys Extender Red Light Issue
Fix 1: Check with Your Service Provider
Yes, you read it right! Linksys extender red light issue can be from the end of your service provider. The first step towards fixing the Linksys extender red light issue is to check with your service provider whether you are receiving the internet services you are paying for or not. Apart from that, before blaming your ISP, ensure that all your pending internet bills are clear.
On the off chance if all your internet bills are clear and there is no issue from your ISP’s end, then chances are you might have not completed the Linksys extender setup process in a correct manner. Thus, to fix the issue, refer to the Linksys extender manual, follow the instructions, and complete the setup process in a proper manner.
Fix 2: Check the Placement
If you have not placed your Linksys extender at the right location, then it is obvious to face the red light issue. Apart from that, if your Linksys extender is placed away from the reach of your existing router, then also you will not be able to get the most out of it. Thus, to fix the issue, relocate your Linksys WiFi range extender. A higher, ventilated, and center-most location in your home would be the best place for your Linksys WiFi range extender.
Fix 3: Check the Wired Connection
The Ethernet cable or wire you have used to connect your Linksys extender and router might have damages. If so, replace your existing Ethernet cable right away to fix the Linksys extender red light issue.
Once you have replaced your Ethernet cable, connect your router to the Linksys extender, open a web browser on a PC or laptop, and try to access the http://extender.linksys.com setup page.
Note: As soon as you are onto the setup page, change the extender’s default settings and password. Doing so, will help you keep your Linksys extender secure from potential threats.
Fix 4: Check the Power Supply
Chances are that the wall outlet you have selected to plug in your Linksys extender is not working properly. For this, you have to unplug your Linksys extender and choose another well-working wall socket for your Linksys extender. Once you’re done, confirm whether your Linksys extender is receiving continuous and steady power supply from its wall socket.
Fix 5: Power Cycle Your Linksys Extender
This is one of the effective ways to fix Linksys extender red light issue. Sometimes, a simple power cycle or reboot is enough to make your Linksys WiFi range extender working. To reboot or power cycle your Linksys extender, unplug it from the power socket, wait for a few minutes, and then plug it back in again.
The power LED on your Linksys extender will become stable after blinking shortly. Now, check your internet connection by connecting your extender to the router and accessing the Linksys extender login page.
That’s all! We hope that this piece of writing will help you fix Linksys extender red light issue. Share with us, which fix helped you out. And, if you have any other suggestions on how to fix Linksys extender red light issue, share with your fellow-readers via comments.