Netgear_Ext Not Showing on Network List? Here’s What to Do!

Is your Netgear extender’s network name not showing on the network list even after a successful setup? If the answer to the question is yes, then know that we’ve got your back! We understand that this issue can give any user a headache. That is why we’ve mentioned some of the most effective tips in this post that’ll help you troubleshoot the issue at hand. But, before you get down to the tips, you need to get acquainted with what actually led to the issue. So, continue reading to know about the reasons why Netgear_ext isn’t showing on the network list.

Why is Netgear_Ext Not Appearing on Network List?

Here are some of the major reasons why the WiFi network name of your Netgear extender isn’t showing on the network list:

  • Your internet connection is poor.

  • The firmware of your device is not up-to-date.

  • Your WiFi connection is disabled.

  • Improper Netgear extender setup.

  • Your WiFi devices are not placed in close proximity.

Now that you are well aware of the reasons why Netgear_ext is not showing on the network list, take the help of the below-mentioned tips to resolve the issue.

Netgear_Ext Not Showing on Network List (Solved)

Tip 1. Check Your Internet Connection

Have you ever noticed that whenever any of your devices stop working, somehow the reason is a slow internet connection? In the same way, a slow internet connection might be the reason why your Netgear_ext is not showing on the network list.

To get rid of the issue, make sure that your Netgear extender is properly connected to the WiFi router. If doing so goes in vain, then contact your Internet Service Provider immediately! Chances are that there’s something wrong from his end due to which you have poor internet service.

Tip 2. Enable Network Connection

A disabled WiFi network connection is another reason that’s making it difficult for your extender’s network name to appear on the list. Therefore, walk through the instructions mentioned below to enable the network connection:

  • Navigate to the Network Adapter Settings.

  • Right-click on the Netgear_ext SSID that you want to use.

  • Then, click on the Enable button.

By enabling the WiFi network connection, you’ll surely be able to fix the issue. On the off chance, if the issue still exists, then take the help of the next tip.

Tip 3. Reduce the Distance Between Your Devices

If you’ve placed your Netgear WiFi extender and router far from each other, then it’s quite obvious why Netgear_ext isn’t showing on the list. Thus, it is recommended that you reduce the distance between your WiFi devices.

Tip 4. Update the Firmware

An outdated firmware can lead to end number of technical issues. Chances are that it might have led to the one that you’re facing right now. To fix the issue, now you know what to do.

Here are the steps that you should follow to update the firmware of your device:

  • Launch an internet browser on your PC.

  • In the address bar, type 192.168.1.250, and press the Enter key.

  • Enter the default username and password to log in to your device.

  • Once logged in to your extender, go to Settings.

  • Under Administration, click on the Firmware Update button.

That’s it! In this manner, you’ll be able to update the firmware of your Netgear WiFi range extender.

Summing Up

After updating the firmware of your WiFi device, check whether Netgear_ext is appearing on the network list or not. If it is, then congratulations! You did it! Also, we are glad that our post was of some help to you.

Kaleem Ullah

Kaleem Ullah, Running an seo company as seocompany.life with a professional team. We Provide SEO services worldwide, With multiple successful clients.

Leave a Comment