Technology

Guidelines to Set Up Netgear Orbi RBK50V WiFi Mesh System

Photo of author

By Kaleem Bhatti

Do you want to access a strong, fast, and reliable internet connection? If the answer to the question is yes, then it is recommended that you perform Netgear Orbi RBK50V. By installing the RBK50V WiFi mesh system, you can easily expand your wireless network and access the internet in every corner of your house. So, read on.

Steps to Perform Netgear Orbi RBK50V Hardware Setup

Mentioned below are the steps that you need to go through to set up the hardware of your Netgear Orbi RBK50V mesh system:

Read Also: My Netgear WiFi Router is Not Working. How Do I Fix It?

Hardware Setup of Orbi RBK50V Router

  • Start by unplugging the wireless router from the wall socket.

  • Then, replace your home router with Netgear Orbi RBK50V.

  • Power on your modem as well as Orbi RBK50V.

  • Wait for some time until the power LED becomes stable.

  • Once the LED becomes stable, take out the Orbi satellite from the box.

Hardware Setup of Orbi RBK50V Satellite

  • Place your Netgear Orbi RBK50V satellite well-ventilated area of your home.

  • Plug the satellite into the wall socket and let the LED become white.

  • Next, press the Sync button on your Orbi satellite as well as the router.

Two Methods to Perform Netgear Orbi RBK50V Setup

Once the hardware setup of Netgear Orbi RBK50V has been completed, you need to connect to the network for login. That can be done using two different methods – Orbi wireless and wired setup.

Netgear RBK50V WiFi Mesh System: Wired Setup

Follow the instructions mentioned below to install Orbi RBK40V with the help of a wire:

  • Create a connection between your home modem and the Netgear Orbi RBK40V using an Ethernet cable.

  • Once done, turn on your computer or laptop. Whatever you prefer using.

  • A confirmation message will pop up on your desktop screen stating – “You are connected to the LAN network”.

And that’s it! In this manner, you’ll be able to perform Netgear Orbi RBK50V wired setup.

Note: Want to set up your Orbi Voice to the RBK50V WiFi mesh system? If yes, then perform Netgear Orbi Voice setup by referring to the user manual.

Netgear RBK50V WiFi Mesh System: Wireless Setup

You can also configure your Netgear Orbi RBK50 mesh system wirelessly. For that, you need to access the orbilogin.com web page. Here are the steps that’ll help you install your WiFi device wirelessly:

  • First of all, make sure that your Netgear Orbi router and satellite are synced.

  • Also, ensure that your WiFi devices are receiving an adequate power supply from the wall socket.

  • Turn on your computer and open up a web browser on it.

  • In the address bar, type orbilogin.com, and hit Enter.

  • The orbilogin page will appear on your computer screen.

  • Click on the login button and follow the on-screen instructions.

So, here you have completed the Netgear Orbi RBK50 wireless setup process. Congratulations!

What happened? Facing issues while trying to set up Netgear Orbi RBK50 WiFi mesh system? No problem! Follow the troubleshooting steps mentioned below and get rid of whatever issue during the setup process.

Troubleshooting Netgear Orbi RBK50V Setup Issues

  • Start by power cycling your Orbi system. Many users prefer doing this to get rid of technical issues. You should try this too. Who knows it might work for you?

  • Check your internet connection. Chances are that you’re facing setup issues because of a weak internet connection. Thus, make sure that your internet connection is fast.

  • If the aforementioned steps didn’t help you troubleshoot the Orbi RBK50V setup issues, then it is advised that you reset your device.

Once you are done resetting your device, don’t forget to reconfigure it.

The Bottom Line

This was all about how to perform the Netgear Orbi RBK50V setup. We hope that this article helped you in installing the RBK50V WiFi mesh system without any hassle. Don’t forget to leave of appreaciation in the comments section below.