Technology

What to do When Linksys Velop Firmware Update Fails?

Photo of author

By John Wick

Not being able to perform Linksys Velop firmware update is one of the major issues that every third Velop user are being concerned. Are you also affected by the same issue? Need not to worry! Let’s ease out the worry lines on your forehead. Go through the fixes outlined underneath and learn how to resolve the Linksys Velop firmware update failure issue in a fly. Let’s get the ball rolling!

There can be a number of reasons that might be stopping you from updating the firmware of your Linksys Velop. Some of the most common ones are listed below:

  • Loose cable/ Ethernet connections
  • Poor connection between the Linksys Velop router and modem
  • Slow internet connection
  • Incorrect Linksys router login details
  • Your Linksys Velop router is surrounded by interference-creating devices
  • The Ethernet cable you’re using is damaged
  • Partial Linksys Velop setup

Now that you have come to the reasons behind why aren’t able to update the firmware of your Linksys Velop device, follow the steps highlighted below to troubleshoot the issue. Let’s get the ball rolling!

Check Your Internet Connection

One of the biggest yet major reasons why you’re facing issues while updating Linksys Velop firmware is a weak or poor internet connection. To fix the issue, ensure that your Linksys Velop router is securely and properly connected to the modem. Apart from this, you have to ensure that the Ethernet cable you are about to use to connect your devices is well-working.

Select the Correct Firmware Version

Nearly 90 percent of users end up facing the Linksys Velop firmware update failure issue because they choose the wrong firmware version for their device model. Thus, ensure that you’re downloading the correct firmware files for your device model.

Get Rid Of Interference-Creating Devices

Have you placed your Linksys Velop router near to interference-creating WiFi devices/ networks? Oops! It seems like you’ve found another reason why you’re unable to perform Linksys Velop firmware update. Need not to worry! To troubleshoot the issue, make sure that you have placed your Linksys Velop router away from devices Bluetooth speakers, baby monitors, HDTV, gaming console, etc. Also, keep your Linksys Velop away from public WiFi. 

After relocating your WiFi device, try to access Linksys Velop setup page and check whether you’re able to update the firmware of your device or not. If not, then perhaps, it’s high time that you reset your Linksys Velop back to its factory default settings. 

Reset Your Linksys Velop

Resetting the device means, whatever changes that you’ve made to your Linksys Velop router, including username, password, and security settings will get erased. So, we recommend you take the backup of the Velop settings prior to resetting:

  • Connect your Linksys Velop router power adapter to a working wall outlet.
  • Make sure that the power light on the device is stable.
  • Then, look for the Reset button on your Linksys Velop router.
  • Once found, press it gently using an oil pin, paper clip, or any other sharp object.
  • Hold the Reset button for a couple of seconds before releasing it.

After restoring your Velop device, access the Linksys router login page and try to configure it, and update its firmware again. 

Bonus: This troubleshooting guide can also be used to fix firmware update issues with Linksys WiFi range extender. And, to cover your home with adequate WiFi signals, ensure that you have completed the Linksys extender setup process in a proper manner.

The Bottom Line

That’s it! This was all about how to troubleshoot the Linksys Velop firmware update failure issue. Anticipating that the steps mentioned in this piece of writing were able to help you fix the issue in no time. In the event that the issue still persists, don’t hesitate to drop us a line in the comments section.